توضیحات
Inductive sensor NJ8-18GK-N-150
– 8 mm non-flush
– Temperature range
– -40 … 150 °C (-40 … 302 °F)
Datasheet excerpt: Technical data of NJ8-18GK-N-150
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 8 mm | |
| Installation | non-flush | |
| Assured operating distance | 0 … 6.48 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 … 200 Hz | |
| Current consumption | ||
| Measuring plate not detected | min. 3 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Ga | IECEx PTB 11.0037X | |
| Equipment protection level Gb | IECEx PTB 11.0037X | |
| Equipment protection level Da | IECEx PTB 11.0037X | |
| Equipment protection level Mb | IECEx PTB 11.0037X | |
| ATEX approval | ||
| Equipment protection level Ga | PTB 00 ATEX 2048 X | |
| Equipment protection level Gb | PTB 00 ATEX 2048 X | |
| Equipment protection level Da | PTB 00 ATEX 2048 X | |
| EAC conformity | TR CU 012/2011 | |
| UL approval | ||
| Ordinary Location | E87056 | |
| Hazardous Location | E501628 | |
| Control drawing | 116-0452 | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | ||
| Hazardous Location | 2020322315002257 | |
| NEPSI approval | ||
| NEPSI certificate | GYJ16.1393X | |
| Ambient conditions | ||
| Ambient temperature | -40 … 150 °C (-40 … 302 °F) | |
| Mechanical specifications | ||
| Connection type | cable | |
| Housing material | PPS | |
| Sensing face | PPS | |
| Degree of protection | IP65 | |
| Cable | ||
| Cable diameter | 4.8 mm ± 0.2 mm | |
| Bending radius | > 10 x cable diameter | |
| Material | SIHF | |
| Core cross-section | 0.34 mm2 | |
| Length | 2 m | |
Inductive sensor NJ8-18GK-N-150
If you need a specific 3WL9111-0at45-0aa0 siemens firmware or series, then we probably have it. Please call or email us your request.
call: +982188856017
Email: info@hermestrading.ir
admin –
با ما در تماس باشید صفحه تماس با ما ——> اینجا کلیک کنید